LGS5實驗室干法制粒機

1. 生產效率 Work efficient

1.1. 螺桿輸料系統中抽真空裝置使壓片更密實，成粒率高

The vacuum device of screw feeding system improves the compactedness, so production efficiency is very high

1.2. 經實驗及生產實踐，物料成粒率可達80%~90%

According to experiment productive practice, the granulation rate can be 80%~90%

2. 人員健康 Health of operator

2.1. 設備密封性好，生產過程中無粉塵泄漏，保護操作人員身心健康

  The sealing condition of the equipment is good, there is no dust flying and powder leakage.

2.2 全封閉結構，無外露傳動機構

   Full closed structure, there is no exposed transmission device

2.3. PLC智能控制，防止誤操作

   PLC intelligent control can avoid the misoperation.

3. 設備性能 Performance of equipment

3.1. 液壓站、電機及電器元件均采用國內外知名品牌，質量可靠

   Hydraulic pressure station, motor and electrical parts are famous brand in China and foreign country. The quality is good and reliable.

3.2. 設備總功率小，節能

   The total power is low, and energy saving

3.3 輸料螺桿旋轉零件上的密封裝置選用優質材料，使用壽命長，無需頻繁更換

   The material sealing device of screw conveyor is good, its using life is long, so frequent replacement is not needed.

3.4. 進料斗有旋轉及震動裝置，可防止物料搭橋，保證生產過程順暢

    There is rotation and vibration device for feed hopper, it can avoid the bridging phenomenon of material. So the production process is very smooth.

3.5. 零部件精密度高，運行平穩無噪音

    The precision of machine parts is high. The machine running is stable and there is no noisy.

3.6. 整理網采用不銹鋼編織網焊接，使用壽命長，成粒率高

    The milling screen is made and welded of stainless steel wire woven, its using life is long and granulation rate is high.

3.7. 壓輪采用特種不銹鋼制作而成，硬度大，使用壽命長

The rollers are made of special stainless steel, hardness is high and using life is long

3.8. 采用真空上料及真空出料，大大降低了人工勞動強度

   It adopts vacuum feeding and vacuum discharging, labor intensity of operator is reduced greatly.

4. 設備使用 The using of equipment

4.1. 拆卸簡單方便：拆卸僅需3分鐘，安裝僅需5分鐘。而其他廠家同類產品拆裝需30分鐘左右

  It is very easy to dismantle: just need 3min to dismantle it and just need 5min to install it. But for the same machine of other factories, it will need about 30min to dismantle or install it.

4.2. 設備整機螺母規格少，所需安裝及拆卸工具少，使用方便

   The specification of screw nuts and bolts of the machine is less, so the needed install and dismantle tool is less.

4.3. 方便檢修及清洗

   Very convenient to maintenance and clean.

5. 外形結構 Appearance and structure

5.1. 外形美觀，結構合理

   Appearance is beautiful and structure is reasonable

5.2. 控制柜與主機一體式安裝，占地面積小.

   Control cabinet and main machine is all-in-one type installation. Its occupied area is small.

5.3.一體式客戶接線，客戶電工僅需要將總電源與電柜用電纜連接即可。而其他廠家同類產品電柜與主機為分開式結構，占地面積大，客戶電工既需要將總電源與電柜線纜連接，有需要將電柜與各電機分別連接，工作量大。

The all in one type installation is very convenient for client’s electrician to connect wires. Client’s electrician just needs to use cable to connect our control cabinet and power source. But for the same machine of other factories, the control cabinet and main machine is separated type, its occupied area is big. And client’s electrician not only needs to connect the cable between control cabinet and power source, but also needs to connect the cables between control cabinet and all motors, so workload is high.

6. 產品業績 Achievement of equipment

6.1. 我公司產品已應用于國內數十家制藥及化工企業，知名度高，如天津天士力、北京康仁堂、安徽源和堂等

Our drying granulation machine is widely used by dozens of China pharmaceutical factories, and popularity is high. For example: Tianjin Tasly Holding Group Co.,Ltd, Beijing Tamages Pharmaceutical Co.,Ltd, Anhui Yuanhetang Pharmaceutical Co.,Ltd.

6.2. 我公司干法制粒機工程師從事干法制粒機研究、設計與生產工作十余年，經驗豐富，技術領先

Our company’s engineer of drying granulation machine is engaged in research and design drying granulation machine more than ten years. His work experience is very rich and technology is very advanced.

一、LGS5實驗室干法制粒機主要配置清單